Standard 01
 
A = Intermediate link
A1 = The outer radius OR determines the dimension A1!
 
As a standard feature, igus? separators should be fitted every 2nd chain link!
Separator 56.1, wide base for maximum retaining force and stability in e-chains? and e-tubes
Separator 56.2 for igus? openable crossbar 450.X. Q. One side with wide base for secure seating, opposite side is narrow for easy cable installation (light clamping). Can also be used in e-tubes
Separator 56.3 with narrow bases for many small cables next to each other. Space-saving - for e-chains? and e-tubes
For example, for side-mounted applications Separator 56.4 asymmetrical, results in defined clearance and spacers can be dispensed with. For e.g. Side-mounted applications. For e-chains? and e-tubes
Notch separator 56.5 for the notch crossbar With scaling to locking crossbars. Can be positioned precisely. For e-chains? and e-tube
 Full-width shelf 520.XX (inside widths 50 - 450 mm). Full-width shelf locks securely into separators at both ends, giving a fixed width. Additional separators can be moved along the shelf in any horizontal direction. They can be fitted at three different heights

(option 02)
 
A = Intermediate link
A1 = The outer radius OR determines the dimension A1!
 
Tested and proven interior separation elements for special and extremely variable partitioning!
 
Height slot separator 408
For very fine interior separation. No retrofitting into an existing interior separation system without dismantling the interior separation.
 
Slotted separator 409 (open on one side)
Quick installation - can be retrofitted in existing separation system without dismantling (top and bottom notches cannot be used for installing shelves)
 
Locking separator 404
For environments with very high humidity (> 85%). Locks with extra retention force. Recommended: one locking separator per e-chain? link.
 
Quick separator T563
For fast retrofitting of interior separation or for installation without dismantling the interior separation.
 
Shelves 420.X
 For horizontal separation. Shelves of various widths can be arranged in steps of 7mm on 7 levels (not in combination with 404).

(option 03)
 
A = Intermediate link
A1 = The outer radius OR determines the dimension A1!
 
Tested and proven interior separation elements for special and extremely variable partitioning!
 
Middle plate 403
for separation with shelves 420.X (table on the left below) in vertical increments of 7 mm on 7 levels.
 
Locking separator 410
like a middle plate but with increased holding force in the case of applications with high humidity (> 85%).
 
Shelves 420.X
 For horizontal separation. Shelves of various widths can be arranged in steps of 7mm on 7 levels (not in combination with 404).