Option 1: Standard
As a standard feature, igus? separators should be fitted every 2nd chain link!
 
45.1 standard ¨C for all uses
Separator, wide base for maximum holding strength and stability in e-chains?
 
45.2 Faster installation of cables
Secure seating on one side with wide base, opposite side narrow for easy installation of cables.
 
45.3 For many thin cables
Separator with narrow base for many thin cables fitted side by side. Space-saving, secure state ¨C for e-chains?.
 
45.4 For e.g. side-mounted applications
Asymmetrical separator, results in defined clearance and spacers can be dispensed with.
 
45.5 Locks in securely in preset increments
The notch separator for the integrated latching can be positioned exactly. Recommended for side-mounted applications.
 
45.12 Lean separators
The new design of the igus? lean separators allows extremely fast fitting of shelves in several layers, which significantly reduces harnessing time. Enables extremely fast replacement of individual cables in very full e-chains?.
 
Horizontal interior separation
 Locks securely into the separator at both ends, allowing a fixed width. Can be used as a full-width shelf for integrated interior separation or as a shelf for modular shelving at three levels.

Option 2: Optional full-width shelf
As standard, igus? separators should be fitted every 2nd chain link!
 
Slotted separator 302
Vertical separation in e-chains?. The slot allows basic vertical/horizontal shelving arrangements.
 
Separator 301
For easy vertical separation in e-chains?.
 
Separator with wide base* 302.24
If you want wider spacing between the separators or if they are to be fixed in position, e.g. in 90¡ã applications. (*For side-mounted applications)
 
Spacer* 305.XX
Spacers can be used to fix separators in position (can only be fitted along inner radius on the fixed opening crossbar). XX = width of spacer, choice of 8, 12mm. (*For side-mounted applications)
 
Full-width shelf 320.X
 Recommended if many small cables with similar or same diameters are used. For full-width separation. Full-width shelves can be arranged in steps of 12mm on 3 levels.

Option 3: Optional shelves
As a standard feature, igus? separators should be fitted every 2nd chain link!
 
Middle plate 304
for modular shelving with shelves 2200.X in height increments of 5 mm on 7 levels.
 
Height slot separator, open 307
Quick installation - can be retrofitted in existing separation system without dismantling.
 
Side plate 303
like middle plate. Allows modular shelving right up to the side links.
 
Shelf 2200.X
 In the case of cables with different diameters, shelves can be used at different heights. You can arrange in steps of 5mm on 7 levels. #ERR No Translation - Text ID 5524#

Strain reliefs

Strain reliefs

Strain reliefs

Strain reliefs

Strain reliefs

Design specificationFurther information on "gliding application"

• Very good wear and noise values
• Very simple, modular assembly

1. Interface connector

2. Plastic glide bar

3. Clamping shoe

4. Glide strips

5. C-profiles

Design specificationFurther information on "gliding application"

• Very good wear and noise values
• Very simple, modular assembly

1. Aluminium profiles

2. Plastic glide bar

3. Heavy-duty bracket option

4. Glide strips

5. C-profiles

6. Silencer profiles

Design specificationFurther information on "gliding application"

+ Easy assembly using installation sets
+ two-part model ¨C adjustable from chain width
+ Very strong
+ Cost-effective
+ Large selection

Guide trough without glide bars, Part No. 93.30, guide trough with glide bars Part No. 93.31

Installation sets, Part No. 93.50. XX